FocusHacks Home Home
All Hacks

Zetec Engine
SPI Engine

Detailing and Cleaning


Radio removal

Ever wanted to yank that stock puppy out and put something better in? Here is how..

1. You will need to purchase a 2-pronged radio removal tool. Most stores such as Walmart and audio stores carry them. If not, Crutchfield includes a pair in your order. If you can't find a tool like this, a bent coat hanger works almost as well.

2. Insert the tool/coathanger into the two holes on either side. As you insert the tool, you will feel the prongs that keep the radio inside the dash.

3. Push the tools away from each other horizontally (left towards the left; right towards the right).

4. Gently pull the radio out and disconnect the connectors on the back side.

comments powered by Disqus