FocusHacks Home Home
All Hacks

Zetec Engine
SPI Engine
General
Suspension

Interior
Exterior
In-Car-Entertainment
Detailing and Cleaning

Maintenance
Miscellaneous

Programming new keyless remotes

This is how you add more keyless entry remotes to your focus!

Time Required:
5 minutes

Tools Needed:

  • Hands
  • The key you use to start your car
  • All remotes you plan to use on your car (not just the new one)

    Procedure:


    1) Gather all the remotes you plan on using with your car.
    2) Get in car, fasten seatbelt, and close doors to make sure it doesn't beep when you turn the ignition to "Run"
    3) Place key in the ignition.
    4) Turn the ignition to "Run" (Not Start), then back to "Off" at least 4 times in 6 Seconds, stopping at "Off"
    5) The car will make one "BONG!" tone, like when you leave the car door open with the keys in the ignition.
    6) Hit "Unlock" on each remote you wish to use. Wait about 1 second between each remote. You only have a window of 10 seconds to add your remotes. Only 4 can be added at a time, and if you add any remotes, then all the ones that used to work for the car that you did not program will not work.

    comments powered by Disqus