Removing / Replacing Alternator

Hacks

List All
Last 10 Hacks

Performance Suspension
Zetec
SPI
Duratec
General

Style I.C.E. & Audio
Interior Hacks
Exterior Hacks
Detailing

Other Hacks Miscellaneous
Maintenance

Other Content Have I helped you? Consider donating!

My GPG Key

Hack Name: Removing / Replacing Alternator (Zetec) (Printer Friendly Version)

Type: Miscellaneous

Description:
Removal of the alternator may be done when you need to upgrade to a higher output alternator, or to install an underdrive pulley such as the AEM or Focus Central Kit, which requires replacement of the alternator pulley.

How To Do It!
Time Required:
1 Hour

Tools Needed:

Socket Set

Prying tools

Torque Wrench (Optional)

Procedure:

1. Disconnect the battery ground cable.

2. Remove the accessory drive belt. Information can be obtained from the Underdrive Pulley How-To

3. Remove the alternator electrical connector cover.

4. Disconnect the alternator electrical connectors.

5. Remove the coolant expansion tank bolt.

6. Detach the coolant expansion tank from the clip and secure to one side.

7. Detach the power steering reservoir and secure to one side.

8. Detach the engine wiring loom bracket and secure to one side.

9. Detach the ground cable.

10. Detach the evaporative emission canister purge valve and secure to one side.

11. Remove the first bolt.

12. Note:

The second bolt must be fully disengaged from the bracket although it is not possible to remove the second bolt at this stage.
Unscrew the second bolt fully.

13. Remove the alternator.

Install in reverse order.

Article Added By:
axon

Instructions provided as-is. You automatically accept the terms of Focushacks.com's disclaimer by using, distributing, reading, or talking about instructions found on our site. The Disclaimer is on the front page of FocusHacks.com.